The installation and debugging of automatic mixing truck is an indispensable link to go through before the use of the equipment. It can not be ignored, otherwise a problem will cause the use of the equipment is not suitable. So how about the installation and debugging of the automatic mixer?
Car installation design and selection of automatic stirring lesson objectives for connecting and process requirements by the differences of all kinds of differences of stirring operation to complete the installation, when designing the selection according to the process of mixing work goals and requirements, determine the agitator type, thought electric power, stirring speed, and then select the speed reducer, frame, stirring shaft, shaft seal parts, etc.
The agitator type should be selected according to the process premise, mixing objectives and requirements. When selecting the agitator type, the dynamic characteristics of the agitator and the causal relationship between the movement pattern of the agitator in the mixing process and various mixing objectives should be fully grasped.
According to the determined stirrer type and stirrer in the process of mixing in the movement of the form, the process of mixing time, sedimentation speed, lax control requirements, after the implementation of tactics and accounting machine imitation design, determine the power of the electric idea, stirring speed, stirrer diameter.
According to the electric power, stirring speed and process premise, from the reducer selection table to select and determine the reducer model. If the reducer is selected according to the practical task torque, the practical task torque should be less than the allowable torque of the reducer.
According to the output shaft head D of the reducer and the supporting method of the stirring shafting, choose the frame and coupling of the same model and specifications as D. According to the device and structure requirements, the structure type of mixing shaft is designed and selected, and its strength and stiffness are checked.
In the above process, the combination and equipment of automatic mixer installation can be referred to. The connecting hub size between various parts in the equipment process is the shaft head size, and the parts with the same shaft head size can be exchanged and combined.
When we are installing the blender, its debugging part is very important. If you are not clear about how to do it before, you can consult the website www.youxikm.com first, which is not easy to make mistakes!