After a long time of wind and sun exposure, the paint on the surface of the automatic mixer may be partially oxidized and damaged, so we need to maintain it regularly. How should we maintain it?
1、 Shallow scratches: scratches will appear if they are often rubbed and not treated in time. They are more obvious in the sun and are generally removed by light method.
2、 Traffic film: the static layer will be generated due to friction during the driving of the mixer, and the static layer will absorb dust, oil, etc. after a long time, the traffic film will appear. In this way, grinding and polishing can be adopted.
3、 Paint oxidation: under the early ultraviolet irradiation, the paint film will evaporate the oil, and the oil will be emitted after a long time, which will affect the brightness, form an oxide layer and shorten the service life. It can be treated by grinding and polishing.
4、 Cracking: cracks will appear on the surface without care for a long time. It will continue to penetrate the car paint until it penetrates the whole color paint layer. This phenomenon is called "cracking". This requires frequent waxing to reduce cracking.
5、 Corrosion mark: the corrosion mark is mainly caused by insects, bird droppings, tree juice, tar, etc., which can be polished by grinding.
6、 Fading: oil fume and pollution will cause fading, which will cause uneven color difference of car paint. It can be treated with grinding and polishing, and repainted in case of serious.
7、 Water marks: marks left by water adhered on the surface and then evaporated and oxidized. Slight water marks shall be treated by waxing and polishing. In severe cases, they shall be ground or painted.