Automatic mixer truck is widely used in the chemical industry. Mixing operation is more or less used in many chemical production. Today, let's take a simple look at the use characteristics of automatic mixer truck?
The main structures of the automatic mixer truck include walking chassis, engine, hydraulic torque converter, front and rear double drive axles, feeding device, feeding hopper, discharge hopper, extended discharge hopper, frame, mixing drum, special reducer for mixing, hydraulic system, electric control system, automatic water supply system, etc. Here, Xiaobian will introduce some characteristics of automatic feeding mixer in detail. The specific features are as follows:
The rotation of the mixing drum of the mixing truck is driven by the motor through a special planetary reducer. The output shaft of the planetary reducer can swing at a certain angle to meet the beating of the mixing drum under bad road conditions. The dry material is automatically fed by shovel arm, boom oil cylinder and quantitative hopper according to the design ratio.
The hydraulic system adopts constant power variable piston pump to reduce the power loss of the engine. The water inlet system can realize automatic water inlet according to the metering setting.
The traveling system consists of the engine passing through the torque converter, front and rear drive shafts to the front and rear axles. The invention adopts the form of front and rear double shaft drive. The torque converter is used to reduce the impact on the engine and prolong the service life of the engine.
Double spiral blades are arranged on the inner wall of the mixing drum of the automatic mixing truck. Forward rotation is used for feeding and concrete mixing; Reverse rotation, driven by the spiral blade, the concrete is discharged from the discharge port.
The automatic mixer truck can adapt to a variety of complex engineering construction conditions, such as highway engineering construction, urban access road engineering construction, and even the road surface of Shamian village. There is no problem in all kinds of complex engineering construction environment. In addition, although this kind of mixer truck has a large shape, its climbing ability is no worse than that of diesel vehicles. The key is that it runs smoothly and stably and is not prone to frequent problems, which can well ensure the progress of the project, The actual operation is also very simple.
The maintenance cost of automatic mixer truck is also relatively low. Due to the relatively environmental protection of the applied fuel and natural materials, this kind of mixer truck does not need to dilute the lubricating grease and will not produce carbon deposition, which is also very small for the wear of vehicle parts. At the same time, it is also very good for protecting the diesel engine of the vehicle. Therefore, the maintenance cost will be much lower, At the same time, the service life of the vehicle has also been improved gradually.
The above is the characteristics of the automatic feeding mixer summarized for you. I hope it will be helpful to you. For more information, you can follow our website www.youxikm.com com！